StellSi-Forum

Im Bahnhof Treuenbrietzen treffen 3 eingleisige Strecken zusammen.Er hat ein Wärter-und ein Befehlsstellwerk.Es sind Relaisblock und Felderblock vorhanden.
Beim Wärter sind Mitwirktasten für die Einfahrten beim Fdl vorhanden.Hebelbänke und Fahrplan sind Fantasie.
Es gibt einiges zu tun.Na denn los!

Admin-Edit: Anhang entfernt, Neue Version: viewtopic.php?p=746#p746

Hallo, I'm Diego from NW Italy and i'm a train Dispatcher.

Please i have this problem for trains coming from single track with relais block.

the lever of Entrance signal when train is on station track and entry signal is closed, after having changed releais block at free, can not be put on normal position but is necessary to push the emergency button of signal (white window on lever rest white).

Why in Treuenbrietzen stellwerke there is this behaviour while in Buchloe stellwerke, for trains coming from Memmingen (Turkeim) this doesnt happens ?

I have tried to see the relaisange but all seems to work

Thanks for the reply

Diego from Italy

the Problem happens for both entrance routes from Belzig and Wildpark to all stations tracks..

Good Night

Diego

Do you mean:

Glatzy hat geschrieben:Beim Wärter sind Mitwirktasten für die Einfahrten beim Fdl vorhanden.

This means, that the Ww has to look out of the window and make sure, that the train has stoped. If train has stoped, he has to press the "Mitwirktaste" (buttons "MwT K Fdl" for Signal K and "MwT L Fdl" for Signal L). Then the Fdl can revoke the route. (Using the MwT is a normal command and has no counter.)

very thanks for your answer. i had forgotten that there was this button to push as to keep free the entrance signal.

In others stellwerke that i had downloaded from forum with two cabins (one cabin with the presence of Fdl and other with "less professional railman" pheraps this feature is not present.

Diego

Please is there someone that can explain to me the correct sequence for receiving a train from Wildpark regarding relaisblockand and after this to send a new train to wildpark. (trains are correctly present on my schedule with corrects origin and destinations)
In this case is necessary to reverse the block for sending a train towards my collegue of Wildpark when i receive the first train from wildpark ?
i have tried to look on internet for some explanations about relais block on single track but without success.

Thanks for reply

Diego

Please is there someone that can try to send a train to Wildpark

It seems that train for Wildpark do not occupy the starting signal that does not return at stop.

Good Evening

Diego

intallonabile hat geschrieben:Please is there someone that can explain to me the correct sequence for receiving a train from Wildpark regarding relaisblockand and after this to send a new train to wildpark. (trains are correctly present on my schedule with corrects origin and destinations)
In this case is necessary to reverse the block for sending a train towards my collegue of Wildpark when i receive the first train from wildpark ?
i have tried to look on internet for some explanations about relais block on single track but without success.

Thanks for reply

Diego

Hello Diego!

You have to offer the train to your colleague by "Fernsprecher".

This ist the workflow:
"Zugmeldung"
"Wird Zug xxx angenommen?" --> Here you enter the number of the train. After that, the color of Relaisblock will changing from red to white.
Then you tell the number of minute, when the train departures.

I hope, i could help you. Sorry for my bad english

Best regards
ErsGT

intallonabile hat geschrieben:It seems that train for Wildpark do not occupy the starting signal that does not return at stop.

Hm... It seem that you're right and J, H, G, F to Wildpark seem to be not correct configured.

@Glatzy: Kannst du die Fahrstraßenauflösekontake noch mal prüfen? Mir scheint es, als hättest du die Fa-Kontakte in Ri. Wildpark und in Ri. Belzig fast gleich genannt: fa_f.g.h.j und faf,g,h,j

Thanks for the answer at all

Diego